Mechman

P101 GM 4 pin for single wire turn on

Standard GM 4pin plug with single yellow wire that connects to a 12v key on/off switch source from the application. Can be hard wired into an OEM harness for stealth look or sourced directly from the...

P101-L Voltage boost harness for GM 4 pin regulators for a 1 volt increase for Lithium batteries

*** VOLTAGE BOOST NUMBERS ARE BASED OFF OF STANDARD MECHMAN 14.8 VOLT REGULATORS*** This voltage boost harness fits alternators with a GM 4 pin plug and is similar to our "plug and play" H104-L...

P101-L-1 Voltage boost harness for GM 4 pin regulators for a .5 (half) volt increase for Lithium batteries.

*** VOLTAGE BOOST NUMBERS ARE BASED OFF OF STANDARD MECHMAN 14.8 VOLT REGULATORS*** This voltage boost harness fits alternators with a GM 4 pin plug and is similar to our "plug and play" H104-L...

P101-L-3 Voltage boost harness for GM 4 pin regulators for a 1.5 volt increase for Lithium batteries

*** VOLTAGE BOOST NUMBERS ARE BASED OFF OF STANDARD MECHMAN 14.8 VOLT REGULATORS*** This voltage boost harness fits alternators with a GM 4 pin plug and is similar to our "plug and play" H104-L...

P101-L-4 Voltage boost harness for GM 4 pin regulators for a 2 volt increase for Lithium or 14-volt AGM batteries

*** VOLTAGE BOOST NUMBERS ARE BASED OFF OF STANDARD MECHMAN 14.8 VOLT REGULATORS*** This voltage boost harness fits alternators with a GM 4 pin plug and is similar to our "plug and play" H104-L...

P101-L-5 Voltage boost harness for GM 4 pin regulators for a 2.5 volt increase for Lithium or 14-volt AGM batteries

*** VOLTAGE BOOST NUMBERS ARE BASED OFF OF STANDARD MECHMAN 14.8 VOLT REGULATORS*** This voltage boost harness fits alternators with a GM 4 pin plug and is similar to our "plug and play" H104-L...

P103 Gm 2 Pin Module for use with factory 05> GM vehicles WITH Mechman alternator

This module is for use on GM vehicles equipped with a 2-pin regulator and an RVC sensor (Regulated Voltage Control). Simply plug module into your vehicle's factory harness and tie out of the way...

Printed Mechman can Koozie

Need to keep your chilled beverage from warming by warm air, sunlight, and body heat. Using a koozie can reduce the rate a drink warms in the sun by up to 50%. Fits most cans and bottles of standard...

Pulley / Rotor nut and shim package

Did you mess up the retaining nut while changing out a pulley? Did you drop it and lose it in the abyss? Do you have a custom bracket or setup that might need some slight pulley alignment...

Regulator / Plug upgrades

Do you currently have a lower voltage or OEM regulator (13.8-14.2 or an ECU voltage control regulator) in your Mechman Alternator but want higher voltage output? Do you need your alternator...

Return - Less than 30 days ONLY (no custom colors) - 10% restocking fee.

*** YOU WILL RECEIVE A RETURN GOODS AUTHORIZATION (RGA) # VIA EMAIL WITH INFORMATION ON HOW TO SHIP YOUR ALTERNATOR TO OUR FACILITY FOR A RETURN. Email: Support@MECHMAN.COM for clarification or...

REVERSE ROTATION Marine 170-amp high output alternator for Ski / Wake Board Boats with 12SI 6.61 inch bolt pattern - V-Belt Pulley

*** REVERSE ROTATION ROTOR APPLICATION *** This alternator uses a reverse rotation rotor and should only be used in applications where the engine is or will be operating in a counterclockwise...

Running Engine Stand (Complete System) For Coyote 5.0L Engines - (2011 To Current - Ford Mustang / Ford F-150)

Introducing the MechMan Professional Series Running Engine Stand "5.0L Coyote Kit". This Kit Includes All Mounting Points To Mount Your 5.0L Coyote Engine. Accepts All 2011 To Current Ford Mustang...

Running Engine Stand (Complete System) For Ford Godzilla 7.3L Engines (2020 To Current)

Introducing the MechMan Professional Series Running Engine Stand with "7.3L Godzilla Ford V8" Mounting Brackets/Adapters. This Kit Includes All Mounting Points To Mount Your 7.3L Godzilla Engine...

Running Engine Stand (Complete System) for GM LT Engines

Introducing the MechMan Professional Series Running Engine Stand with "GM LT Style Engine(s)" Mounting Brackets/Adapters. This Kit Includes All Mounting Points To Mount Your GM LT Style...

Running Engine Stand (Complete System) for LS based Engines

Introducing the MechMan Professional Series Running Engine Stand "Complete System" The ultimate solution for automotive professionals and enthusiasts alike. This heavy-duty,...

Running Engine Stand (Complete System) For SBC/BBC GM Based Engines

Introducing the MechMan Professional Series Running Engine Stand "Complete System" The ultimate solution for automotive professionals and enthusiasts alike. This heavy-duty,...

Running Engine Stand for Coyote 5.0L Engines (2011 To Current - Ford Mustang / Ford F-150)

Introducing the MechMan Professional Series Running Engine Stand "5.0L Coyote Kit". This Kit Includes All Mounting Points To Mount Your 5.0L Coyote Engine. Accepts All 2011 To Current Ford Mustang Or...

Running Engine Stand for Godzilla 7.3L Engines (2020 To Current)

Introducing the MechMan Professional Series Running Engine Stand "7.3L Godzilla Kit". This Kit Includes All Mounting Points To Mount Your 7.3L Godzilla Engine. Accepts All 2020 To Current Godzilla 7...

Running Engine Stand for LS based Engines

A running engine stand is the ultimate tool for automotive professionals and enthusiasts. Built with high-quality materials, it offers exceptional strength and durability, ensuring long-lasting...