P103 Gm 2 Pin Module for use with factory 05> GM vehicles WITH Mechman alternator
- 1.00 LBS
- Bulk Pricing:
- Buy in bulk and save
This module is for use on GM vehicles equipped with a 2 pin regulator and a RVC sensor (Regulated Voltage Control). Simply plug module into your vehicle's factory harness and tie out of the way. This will eliminate the check charging system code (battery light).
MUST USE 4 PIN REGULATOR STYLE ALTERNATOR TO WORK. THIS IS NOT A SOLUTION FOR STOCK 2 PIN STYLE ALTERNATORS!!!!
These are especially popular for the customer who wants to bypass the RVC system so that they can run a stand-alone alternator. The reason for this is that when run in the factory form on these model vehicles there will be fluctuating voltage and normally they will charge at a lower voltage. Although this is all normal since the PCM is controlling the voltage in order to acquire max fuel economy, some will opt to go with a stand-alone unit to acquire a higher and more stable voltage.
Keep in mind this does not work with the factory alternator. You will need to purchase a special ordered unit that is built with single ignition switched turn on. Just order the alternator for your application as you normally would and specify in the notes that it needs to be single wire turn on. If you already have the correct alternator and just need the plug, you will need to purchase the P101 as well. See SKU# P101 for more details.
Videos Hide Videos Show Videos
7 Reviews Hide Reviews Show Reviews
2 pin bypass
Simply amazing!!! Works perfect!!! Highly recommend!!!
Worked on my Saab!
Purchased this for my 08 Yukon XL but decided to try it on my 07 Saab 9-3 that uses the same connector. I also believe GM has some production similarities in the later model Saabs. Using a 4 pin regulator to run 16.1v cold I always had the battery warning message and battery light. Now it does not come up anymore.
This quality made piece did exactly as advertised! Will definitely purchase again!
Item does exactly what it says it does!
Works perfect as it says but only if you plug in all your other plugs in that you unplug like I did I unplugged my grounding loop because I thought I had to run it through but didn't qn forgot to plug it back in an the battery light came on of course so just went back through and plugged everything in like I should have and everything works perfectly. An the 400amp alt I got works great too! Can't wait to get my sub hooked up.
2 pin module
Fantastic! I've been fighting the RVC sensor for months (one of GM's dumber ideas). This fixed all of my erratic voltage problems within minutes. Delivery was fairly quick as well. Thanks for the great product!
I love it turned off the battery light off right away thank you for this product will recommend to everyone
I love this product it turned off the battery light right off will recommend this to everyone